MikroTik RB5009UPr+S+IN Compact Router
Term:
100% Traditional Laybuy. Delivery after full payment.
Attention, eager beaver! Need your delivery in a flash?
No worries, mate! We're here to save the day! Just give us an email at contact@layawayau.com and let us know if you would like to pay more or less each week. Rest assured, we'll also provide you with an estimated delivery date when we make these changes. So don't you worry, your delivery dreams are in safe hands!
RUT360 is an updated version of our all-time best-seller, the RUT240. This compact industrial cellular router can connect to the internet using cellular, Wi-Fi, and wired networks.
The Teltonika RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and a 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps. Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited.
- LTE Cat 6 up to 300 Mbps support with Carrier Aggregation
- Compact size, easy integration
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Events alerts on SMS, EMAIL, RMS
- Digital Input/Output for remote monitoring and control (requires 058R-00229)
Product Code RUT360 Mobile module 4G (LTE) - Cat 6 up to 300 Mbps, 3G - Up to 42 Mbps
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Multiple PDN Possibility to use different PDNs for multiple network access and services
Bridge mode Direct connection (bridge) between mobile ISP and device on LAN
Wireless mode 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
WiFi security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES- CCMP, TKIP, Auto Cipher modes, client separation
ESSID ESSID stealth mode
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden
WAN 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
LAN 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
Routing Static routes, Dynamic routes (planned)
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client
Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forwards, traffic rules, NAT rules, custom rules
DDNS (planned) Supported >25 service providers, others can be configured manually
Network backup Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
Authetication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
VLAN Tag based VLAN separation
Protocols HTTP(S), MQTT, Azure MQTT, Kinesis
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call Reboot, Status, Mobile data on/off, Output on/off
MQTT (planned) MQTT Broker, MQTT publisher
SNMP (planned) SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
Modbus (planned) Modbus TCP status/control
CPU QCA9531, MIPS 24kc, 650 MHz
RAM 128 MB, DDR2
FLASH storage 16 MB, SPI Flash (optional up to 256 MB)
Configurable I/O
2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
Input voltage range 9 - 30 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption 10.5 W max
Ethernet 2 x RJ45 ports, 10/100 Mbps
I/Os 2 x Configurable digital Inputs/Outputs on 4 pin power connector
Status LEDs 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
SIM 1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Antenna 2 x SMA for LTE, 2 x RP-SMA for WiFi
Casing material Aluminium housing with DIN rail mounting option
Dimensions 100 x 30 x 85 mm Weight 247 g
Mounting options DIN rail, flat surface placement
Operating temperature -40 C to 75 C
Operating humidity 10 % to 90 % non-condensing
We can only process ONEorder per customer at a time.
Term:
Recently viewed
So..... Why Layaway AU?
Layaway AU has had over 18,000+ applications in Queensland alone. Not only is Layaway AU well known and trusted in communities around Australia but Layaway AU offers many amazing benefits such as, No Interest Payments, No Late Fees, No Management Fees!